IGNITION 2K15, AUGUST 2015, SRI VENKATESWARA COLLEGE OF ENGINEERING, CHENNAI, TAMILNADU, INDIA

College/University/Organization Name: SRI VENKATESWARA COLLEGE OF ENGINEERING
Organizing Department: MECHANICAL ENGINEERING
Event Date: 2015-08-31 -- 2015-08-31    (YYYY/MM/DD)
Last Date: 2015-08-29    (YYYY/MM/DD)
Address: CHENNAI, TAMILNADU, INDIA

Registration Fee:
NIL

College/University/Organization Website: www.svce.ac.in

Event Website / Brochure link: http://www.ignition2k15.in/

Email Address: pratthosh@gmail.com

About Event:
A NATIONAL LEVEL TECHNICAL SYMPOSIUM

Other Details:
Events:
​THE HAWK (PAPER GLIDER)
Guys good at aerodynamics?Then give a shot at this event.We will provide you with all the materials required,so you just need to show your skill and craft work to win this amazing event,for further details please contact
srivathsan -8056283129

THE PAPYRUS PROPOSAL
  In the interesting field of science,mechanical engineering plays a vital role,we at ignition value your work and we have set a platform for you to come and exhibit your skills by presenting your paper before our elite panel of judges.cash awards are awaiting you!!!!!!

RULES:
  • maximum of 3 members per team
  • maximum of 8 sheets allowed
  • maximum time is 10 mins


please send the abstract before 28th of august  and send the abstract to ignitionsvce2k15@gmail.com with the subject as paper presentation

For further details contact;
Ramanathan-9445199963

ROCKET SCIENCE
Two Liter Pop Bottle Rockets may well be the GREATEST PHYSICAL SCIENCE TEACHING TOOL EVER CREATED!!We Bring you the Water Rockerty contest that exquisitely examines the physical knowledge into practical operations.

Rules: 
  • Maximum of 2 members per team
  • Upto 2l bottles can be used
  • Only single stage rockets allowed
  • No nozzles should be used
  • Only water is allowed as propellant
  • The range will be assessed 
  • Each team gets two trials
  • The decision of the judges are final
  • Pressure used is 3 bar 
For further details contact;
Pratthosh -9677988779
Devanathan-9940316723

​RC ASSUALT
           RC Assualt is aimed at taking RC cars to a whole new level of adventure. Let your RC cars fight with rough terrain and lead others to dirt. Interesting off-road track conditions will test your adrenaline level for sure. Indulge in this game, which has gained booming popularity, in recent days, to experience high-octane action!

To participate:
Every team of maximum 4 members (not necessarily of the same institution) will be allowed to race an RC car which is run by a NITRO- GASOLINE powered IC ENGINE (max.dispalcement – 4.6cc).
Cars should never be run by any fuel or power other than one specified.
Cars should fit into a box of dimensions 500mm X 400mm X 300mm. Antennae are not constrained to any dimension.

  • Batteries for the remote should be brought by the team.
  • Both ready-to-run kit cars and custom fabricated cars are allowed to compete.
  • Online registration is mandatory. 
  
Before the race:
  • Inform your presence to our team’s desk about half-an-hour ahead of the inception of the event.
  • Make sure your team receives a unique slot number which decides the order in which you race.
  • Any sort of technical assistance to your machine won’t be provided by our team.

During the race:
  • Every team will be given a second chance to start, in case of a false start. Race will be restarted. Failing in the second chance will lead to their disqualification.
  • Only one member of the team, standing on the pedestal, should handle the remote.
  • Checkpoints will be framed at various stages of a lap. Any car that goes off the track or immobile should be repositioned at the last crossed checkpoint by a person from your team. Until the car needs him, he should be standing near the starting point of the race.
  • Any car that interferes with the other one will be immediately disqualified. The decision of our team will be the final.
  • Team whose car completes the no. of laps (will be updated at the event) as the leader will be the winner.
  • Winner(s) of every race qualifies to the next until there is a sole champion.
For More details:
          Barath Kumar S (9790767927)
          Abhishek Ajay(9487219926)


KNACK(MAN VS MECHANICS)​
Knack is a new event that will test your physical and mental strength.We are really sure that this event will amaze you so,wait till ignition to know more about it.Hope to see you guys participate in this amazing event in ignition2k15

for further details contact;
Venkata prasad-9791057536

THE BRAINIAC                You think you know technical stuff? You think you know general knowledge? You think you know both?
If you have a “yes” for any one of these questions, this event is for you.

In this event you will be tested on your knowledge, technical skills, reasoning skills and your ability to improvise. We will be conducting a number of rounds on various themes that will test your skills and spontaneity. The number of rounds will depend upon the number of registrations that we receive. There will be on-spot registration as well, but it will be limited and on first-come-first-serve basis.

It is a team event. Each team can have a maximum of 3 members. The final round will test your presenting and speaking skills. 

Be prepared to face the ultimate quiz!!
Are you the true Brainiac?? 

For further information, Contact:
Nataraj Iyer B. – +91 98405 84811  

THE SHUTTER FREEZE​ This is a great opportunity for all   young photo maniacs!!you can send in your photos to the mail id-ignitionsvce2k15@gmail.com with the subject as photography
for further details contact:
harish barathwaj-8428302099

​CAD MANIA
“Simplicity is the ultimate Sophistication” Can you see transparently! Can you draw precisely! Can you showcase distinctly! Then here is your shot to unveil your art. Arise! Ignition 2k15 presents to express your Creativity at will. Study the blueprint and Depict in one of the first choice for product design software “Creo Parametric”. Make you drawing simple yet significant.

INSTRUCTIONS
• The blueprint will be revealed only on the day of event.
• The prelims will be "part modelling" for a duration of 1 hour..
• The 10 participants who finish the task within the stipulated time will qualify for final round.
• The final round will be of "part assembly"...
• The participants will have to draw the part and assemble them within the given time.
• The first person who completes the task first will be the winner
• The judges decision will be final.
• Laptops will not be entertained at any cost.
• Any kind of malpractice will not be entertained at any cost and you will be disqualified from the event.      

 Contact Details:
IGNITION COORDINATORS:

VIGNESHWAR-9940429458
FELIX DANIEL-9384666601

IGNITION 2K15-2015-SRI VENKATESWARA COLLEGE OF ENGINEERING-CHENNAI-TAMILNADU-INDIA

See Also